Flanders Alpha 2000 High Capacity HEPA Filters
The Alpha 2000 High Capacity HEPA filter is available in a nominal 12” depth configuration. It is designed for optimum performance and low operating costs in both new and replacement systems. The Alpha 2000 saves space, energy, and material and labor costs with 40% more media area than the standard capacity Alpha Cell filter.
ALPHA 95
– Minimum efficiency is 95% on 0.90 micrometer particles
– Manufactured in a variety of wood and metal frame types
– Available with a media pack with aluminum separators or without separators pack
– Available in a variety of sizes with either a gasket seal or gel seal
ALPHA B-1 FRAME
– All-welded 14 gauge galvaneal steel construction for corrosion resistance and rigidity
– Stainless steel locking arm and screw assemblies secure and seal the HEPA filter
– Factory-drilled alignment holes facilitate field assembly of built-up filter banks
– Optional prefilter assembly is available for direct attachment to the frame
ALPHA CELL
– Galvaneal frame
– UL 900 Class II
– Hemmed edge corrugated aluminum separators
– Water resistant fiberglass media
– Closed cell neoprene gasket
– 99.97% efficiency on .3 microns
ALPHA FRAME
– 14 ga. Galvanized steel frame for corrosion resistance and rigidity
– Four spring-loaded swing-arm assemblies compress filter gasket for leak-tight seal
– Flat smooth-finished gasket sealing surface is backed by a rigid standing flange
– Pre-punched holes facilitate field assembly of built-up filter banks
– Swing-arm retainers position filter properly in frame
– Optional prefilter frame assembly available for direct attachment to swing-arm
ALPHA HT
– Metal-frame separator-style
– For applications with high-temperature requirements up to 1,000 ° F for exhaust air only and 500 ° F for supply air
– Available with gasket or fluid seal
– Minimum efficiency of 99.97% on 0.30 micrometer size particles
ASTR Frame
– Filter holding frame and fasteners
– Accepts any standard size panel, box or header type filter
– Positive sealing integrity with side wall mounted fasteners
– More information and cut sheets available upon request
A-4 Frame
– Holding Frames for Gel Seal HEPA filters
– Gel seal for the best protection against by-pass leakage
– More information and cut sheets available upon request
B-1 Frame
– Holding Frames for gasketed HEPA filters
– All welded 14 gauge galvaneal steel construction for corrosion resistance and rigidity
– More information and cut sheets available upon request
C-3 and C-4
– Crank lock HEPA filter housing
– Access for up to four filters and pre-filters wide per door for quick filter change-outs
– More information and cut sheets available upon request
K-Trac
– Modular Filter Framing System
– Filters are tightly sealed to eliminate air by-pass
– Modules are factory engineered with built-in stiffening
– More information and cut sheets available upon request
SUPERFLOW 2K
– V-bed HEPA (99.99% at 0.30 micrometer)
– Designed for high airflow applications at an ultra low pressure drop
– Can be used in systems with air velocities of 500 fpm and a pressure drop of 1.0 inch w.g.
SUREAIRE
– Diffuser section
– Diffuser plate helps distribute air more evenly across the final filter bank
– Diffuser plate open area is 51%
– More information and cut sheets available upon request
SUREFLO
– High air volume, low pressure, drop filter housing
– Bank design doubles the filter face area reducing the face velocity of 50%
– More information and cut sheets available upon request
SURELOCK-B
– Bolt lock HEPA filter housing
– Surelock-B side access HEPA filter housings are designed to accept all gasket-seal HEPA filters
– More information and cut sheets available upon request
SURESEAL
– Two stage Prefilter and secondary filter housing
– Accepts any standard size panel, box or header type filter
– Positive sealing integrity with side wall mounted fasteners
– More information and cut sheets available upon request